Air Duct Cleaning in Irving - Flat Price Per System, No Per-Vent Upsells

Air Duct Cleaning in Irving, TX

HVAC cleaning in Irving typically runs $380-$620 for a full system, with most residential jobs completed in a single visit. The combination of North Texas heat cycling and Irving’s aging 1980s-1990s duct stock means we find degraded mastic seals and debris-compacted coils far more often here than in newer suburban markets. Call (940) 240-8552 for a written quote before any work starts.

Call (940) 240-8552

Why Irving Homes Are Different

Irving’s housing splits into two distinct eras that shape every job we quote. South and west Irving neighborhoods built in the 1960s-1970s often retain original sheet-metal trunk lines or early flex duct that has never been opened. Valley Ranch, the massive master-planned community built primarily 1982-1995, now sits at the 30-40 year mark where fiberglass-lined flex duct and mastic seals fail under repeated summer heat stress. These homes were not designed for the 100°F+ weeks that have become normal in Irving.

The Las Colinas corridor along SH-114 adds a commercial layer unique to this market. Multi-tenant office towers and hotel campuses built from the 1980s through 2000s run complex multi-zone HVAC systems that require commercial-grade cleaning protocols. Technicians working the O’Connor Road corridor regularly encounter poorly documented ductwork shared across tenant spaces that have been subdivided and renovated multiple times, turning quoted half-day jobs into full system-mapping exercises.

North Texas allergy loads compound the problem. Mountain cedar in January and February, oak and elm pollen through spring, and ragweed in fall pull high biological volumes through Irving ductwork year-round. Systems that run almost continuously from May through September never get a recovery period.

Our Main Irving Services

Homeowners in Valley Ranch and Las Colinas call us most often for these three services, each with its own dedicated Irving page.

Air Duct Cleaning in Irving

We clean the full duct network from plenum, the main distribution box, through every duct run to each register. In Irving’s older homes we regularly find original flex duct that has never been accessed; in Valley Ranch properties we photograph degraded mastic seals before recommending whether cleaning alone is sufficient or if Air Duct Cleaning in Irving should include repair. Every job ends with a Documented Photo Record of every run.

Dryer Vent Cleaning in Irving

Lint accumulation in dryer vents is a genuine fire hazard, not a maintenance preference. We remove the vent line from both ends, run a rotary brush through the full length, and verify airflow with an anemometer. In Irving’s townhome clusters and older apartment conversions near MacArthur Boulevard, we often find vents with multiple elbows that trap lint in ways straight runs do not. Dryer Vent Cleaning in Irving includes a written scope and photo documentation.

Duct Repair & Sealing in Irving

When mastic seals crack or flex duct separates at the collar, cleaning alone wastes money. We cut access where needed, replace damaged sections with new flex or sheet metal, and seal with mastic rated for North Texas temperature swings. Valley Ranch homes are now at the age where this service outnumbers standalone cleaning calls. Duct Repair & Sealing in Irving is quoted with a written price before any panel comes off.

Before

After

HVAC Cleaning in Irving

Full HVAC Cleaning in Irving addresses the components air actually passes through before it reaches your rooms. In Valley Ranch homes with 30-plus-year-old systems, we regularly find evaporator coils coated with debris that has bypassed filters, and blower wheels throwing off balance from dust accumulation. The continuous summer runtime here means these components work harder and fail faster than national averages predict. We document every stage with before-and-after photos, included as standard on every job.

Evaporator Coil Cleaning

Signs you need it

Ice formation on the coil, weak airflow from registers, or cooling that cannot hold setpoint during Irving afternoon peaks.

What it costs in Irving

Evaporator coil cleaning typically runs $180-$340 depending on accessibility and contamination level.

How we do it

We remove the access panel, apply foaming cleaner formulated for aluminum fins, rinse with low-pressure water, and photograph the coil surface before and after.

Blower Cleaning

Signs you need it

Vibration noise from the air handler, uneven airflow room-to-room, or dust puffing from registers when the system cycles on.

What it costs in Irving

Blower wheel and motor cleaning typically runs $160-$280.

How we do it

We remove the blower assembly, clean the wheel vanes with compressed air and solvent, check motor amp draw, and reinstall with a photographed seal verification.

What HVAC Cleaning Costs in Irving

How do I know my HVAC system needs cleaning versus just the ducts?

If your ducts are clean but rooms still heat unevenly or the system runs longer than it used to, the problem is likely in the coil, blower, or air handler. We inspect these components during every duct cleaning quote and will show you what the camera sees. Call (940) 240-8552 and we’ll put a written number next to it.

Can HVAC cleaning fix my high summer electric bills in Irving?

A dirty coil or blower can raise energy use 15-25% by forcing longer cycle times, but it is not the only cause. We measure temperature split and static pressure to determine whether cleaning will deliver real savings or if the issue is duct leakage or refrigerant charge. The written quote includes what we expect to find and what we will measure.

Air Quality & Sanitizing in Irving

Air Quality & Sanitizing addresses what lives in the debris, not just the debris itself. In Irving’s climate, the combination of 100°F attic temperatures and continuous system runtime creates ideal conditions for microbial growth on wet coils and in standing water pans. We treat the biological load with EPA-registered products and install preventive hardware where appropriate. Every treatment is photographed, and re-treatment within 365 days is covered under our Done Right Promise if the original scope was followed.

Mold Treatment

Signs you need it

Musty odor when the system runs, visible growth on register edges, or allergy symptoms that worsen at home and improve when you leave Irving.

What it costs in Irving

Spot mold treatment runs $220-$380; full-system antimicrobial treatment runs $340-$580.

How we do it

We apply an EPA-registered antimicrobial fog to all duct surfaces, treat the coil and drain pan with a biocidal foam, and run a post-treatment air sample if requested.

UV Light Installation

Signs you need it

Repeated mold recurrence after cleaning, or a coil that stays wet due to Irving’s long cooling season.

What it costs in Irving

UV-C light installation near the coil typically runs $380-$620 including the lamp and electrical connection.

How we do it

We mount a Honeywell or Aprilaire UV lamp in the supply plenum, wire to the air handler’s 24V circuit, and show you the installation before closing the panel.

What Air Quality & Sanitizing Costs in Irving

Is mold in my ducts common in Irving?

We find active mold in roughly one of four Irving systems over 20 years old, concentrated in Valley Ranch and south Irving where attics exceed 130°F in summer and cooling runs continuously. The camera does not lie; we will show you before quoting treatment. Call (940) 240-8552 for an inspection with written findings.

Do UV lights actually prevent mold or just slow it?

A properly sized UV-C lamp at the coil surface prevents mold colonization on that surface by breaking DNA bonds; it does not sterilize air passing through at speed. We install Honeywell and Aprilaire units sized to the coil dimensions, not generic wands, and we warranty the installation for one year.

Brands We Service in Irving

We carry parts and service equipment from Rotobrush, Nikro, Honeywell, and Aprilaire, with coils, UV lamps, and media filters stocked for same-day replacement on most Irving jobs. See our brands for full specifications.

Pricing for Air Duct Cleaning in Irving, TX

Neighborhoods We Serve in Irving

Our crews run from the Dallas-Fort Worth office and typically schedule Irving appointments with morning or afternoon windows. We serve these neighborhoods regularly:

• Valley Ranch
• Las Colinas
• Kitty Hawk
• University Hills
• Plymouth Park

Response time to any Irving address is typically same-week with flexible scheduling, not emergency dispatch.

Service Area - Cities Near Irving

CleanRun serves the full Dallas-Fort Worth metro from our regional office, with regular appointments in Dallas, TX, Richardson, TX, Carrollton, TX, and Plano, TX. Crews are dispatched to Irving daily; you do not need to call a separate number for any of these cities.

FAQs About Air Duct Cleaning in Irving