Whole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Fast, Reliable Air Duct Cleaning Across Frisco
Air duct cleaning for a typical Frisco home runs $380-$720 for a full system, depending on the number of air handlers and duct runs. Most jobs are scheduled within a week and completed in a single day. Call (940) 240-8552 for a written estimate before any work starts.
We serve Frisco from our Dallas-Fort Worth dispatch office, with crews running daily routes through the master-planned communities east of the Dallas North Tollway and the newer subdivisions west of Preston Road. The homes we work on are almost always large two-story tract builds, 2,500-5,000 square feet, with multi-zone systems that have been running since the mid-2000s without ever being opened. That specific housing stock is what our Air Duct Cleaning team knows. We don’t guess at scope. We camera-inspect first, write the price second, and clean third.
Why CleanRun Air Duct Cleaning Lewisville Is Frisco’s Preferred Air Duct Cleaning Company
We’ve been in Frisco homes since 2013, and the pattern is consistent: a homeowner calls because the vents look dusty, the system runs constantly, or someone in the house has developed allergies they can’t explain. The house is fifteen years old. The homeowner assumes the ducts were cleaned at some point before they moved in. They weren’t. Our Documented Photo Record, included on every visit, shows them what we found. That’s why Frisco customers refer us inside their subdivisions.
Our crews are background-checked and uniformed under Haven Standard Clause 3: Verified Crews. Tomas Reyes established the H.A.V.E.N. Standard in 2013, and every job since has started with a written price and ended with a photo record of every duct run. No exceptions. The 365-Day Done Right Promise is backed in writing, not mentioned in passing and forgotten. If the work isn’t right, we make it right.
Scheduling is coordinated from our Dallas-Fort Worth office, but the technicians serving Frisco live in the metro and know the local construction patterns. They recognize the flex-duct brands used by the major Frisco builders between 2005 and 2015. They know which subdivisions have slab foundations that have shifted enough to separate register connections. That local knowledge changes what we look for during video inspection, and it changes what we quote.
Our Air Duct Cleaning Services in Frisco

Residential Duct Cleaning
Frisco’s residential stock is almost entirely large builder homes in communities like Phillips Creek Ranch, Starwood, and Westfalls Village, built between 2000 and 2018. These houses have long duct runs, multiple air handlers, and flex duct installed under production pressure. Our residential cleaning starts with a video inspection of the full system, followed by negative-pressure extraction using Rotobrush agitation tools and HEPA filtration. The written scope specifies every duct run to be cleaned, and the photo record documents each one before and after.

Commercial Duct Cleaning
Frisco’s commercial growth along the Dallas North Tollway and Preston Road corridor has produced office parks, medical suites, and retail spaces with rooftop package units and extensive flex-duct distribution. We clean these systems during off-hours to avoid disrupting operations, and we document the work with the same photo record standard we apply to residential jobs. Written pricing is delivered before any panels come off.

Supply Duct Cleaning
Supply ducts deliver conditioned air to each room, and in Frisco’s two-story homes they often run through unconditioned attic space where summer heat drives extreme thermal expansion. The flex duct sags between supports, creating debris traps where drywall dust and pollen accumulate. We clean supply runs with powered agitation under negative pressure, then camera-verify the full length of each run. The homeowner receives the photo record as a standard deliverable.

Return Duct Cleaning
Return ducts pull air back to the air handler, and in Frisco they are the primary entry point for the extremely high seasonal pollen loads from cedar elm, oak, and mountain cedar that characterize the Cross Timbers/Blackland Prairie transition zone. Return trunks in Frisco homes often show the heaviest debris buildup, especially in homes with standard 1-inch filters that were changed infrequently during the first decade of occupancy. We prioritize return duct cleaning because a blocked return starves airflow and forces the system to run longer, which is exactly what happens in Frisco from May through September.

Full System Cleaning
A full system cleaning includes every supply run, every return run, the plenum (the distribution box attached to your air handler), the blower motor assembly, and the filter housing. In Frisco’s multi-zone homes, this means cleaning two or three complete systems, not one. The written scope itemizes each component, and the price is fixed before work begins. We use Nikro and Abatement Technologies negative-pressure equipment, with Honeywell and Aprilaire filtration accessories where the system design supports them.

Video Inspection
Video inspection is not an upsell. It is how we determine what actually needs to be done before we write a price. In Frisco’s long flex-duct runs, video reveals hidden sags, disconnected joints at registers, and construction debris that a surface check would miss. We camera-inspect every run we propose to clean, and the customer sees the footage before approving the scope. Haven Standard Clause 1: Written Price Before Work Starts. No exceptions.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterTrusted Brands We Service in Frisco
Our equipment roster includes Rotobrush agitation systems, Nikro and Abatement Technologies negative-pressure extractors, and Honeywell and Aprilaire filtration components. These are trade-recognized brands that customers can look up independently. We don’t claim performance beyond manufacturer specifications. We do claim that our technicians are trained on each unit, that the equipment is maintained to manufacturer intervals, and that the right tool is matched to the duct material and debris type found in your specific system. For Frisco homes with original flex duct from the 2005-2015 build wave, that matching matters.
Common Air Duct Cleaning Problems We See in Frisco Homes

- Original construction debris still in place. Frisco’s master-planned tract homes went from builder to buyer so fast that a huge share still have never had ducts cleaned since original construction. A 2010-built Phillips Creek Ranch house can be on its first cleaning, not its third. The flex duct still holds drywall compound dust and blown cellulose particles from the build.
- Disconnected register joints from slab movement. Frisco sits on Blackland Prairie clay soil that shifts seasonally with moisture changes. That movement stresses slab foundations and can separate flex-duct connections at floor registers, especially in homes built during the rapid 2005-2010 expansion. Video inspection finds these separations; cleaning alone does not fix them, but identifying them prevents repeated dust complaints after the cleaning is done.
- Wrong MERV rating starving airflow. Frisco systems run nearly continuously from May through September. A MERV 13 filter in a system designed for MERV 8 restricts airflow, increases static pressure, and causes particulate to bypass the filter and redeposit in the ductwork. We check the blower motor specs and recommend the correct rating.
- Hidden sags in long attic runs. Two-story Frisco homes with 40-foot flex-duct runs through unconditioned attic space develop sags where the inner liner collapses slightly. Debris accumulates in these low points. Without video inspection and powered agitation, a vacuum-only cleaning leaves the sag untouched and the homeowner with the same dust problem six months later.
Pricing for Air Duct Cleaning in Frisco, TX
A typical residential full-system cleaning in Frisco runs $380-$720. Single-system homes at the smaller end of the local range, around 2,500 square feet with one air handler, fall toward the lower end. Large homes in Starwood or Phillips Creek Ranch with three air handlers and extensive duct runs fall toward the upper end. Commercial systems are scoped individually based on unit count and access.
| Service | Typical Range in Frisco |
|---|---|
| Single-system residential (1 air handler, up to 12 runs) | $380-$490 |
| Dual-system residential (2 air handlers, up to 20 runs) | $520-$640 |
| Full-system residential (3 air handlers, 20+ runs) | $620-$720 |
| Video inspection only (no cleaning) | $150-$220 |
| Return duct cleaning as standalone service | $280-$380 |
What affects cost: number of air handlers, total duct runs, accessibility of the plenum and blower, and whether disconnected joints or damaged flex duct require repair before cleaning can proceed. We do not price per vent. We price per system, in writing, before any work starts. Free Second Opinion on any written estimate from a competitor. Call (940) 240-8552.
We Also Serve Cities Near Frisco

Our crews run regular routes through Little Elm, Denton, Lewisville, and McKinney, with the same written-price and photo-record standard on every job. Scheduling is coordinated from our Dallas-Fort Worth office for the full metro area.
Serving Frisco, TX - Our Local Coverage Area
We’re based in the Frisco area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Air Duct Cleaning in Frisco

For a Frisco home of that age on its first cleaning, we recommend a full system clean now, then reassessment every 4-6 years based on what the video inspection shows. First cleanings in 2005-2015 tract homes typically remove significant original construction debris, and the subsequent interval lengthens because the system is no longer starting from a contaminated baseline. Homes with multiple pets, ongoing renovation, or occupants with respiratory sensitivity may need shorter intervals. Call (940) 240-8552 and we’ll scope it in writing.
Yes. Long flex-duct runs require powered agitation tools that move through the full length of the duct, not just vacuum contact at the register. We use Rotobrush systems sized to the duct diameter, under continuous negative pressure from a Nikro or Abatement Technologies extractor, with HEPA filtration on the exhaust. Without agitation, drywall dust and pollen adhere to the flex-duct liner and remain in place. We camera-verify the full length of each run before we leave.
It can. Seasonal moisture changes in Blackland Prairie clay cause expansion and contraction that stresses slab foundations and can separate flex-duct connections at floor registers. We inspect for this during our initial video survey. If we find separated joints, we document them in the photo record and quote repair separately from cleaning. Cleaning a system with disconnected returns is incomplete, because unfiltered air is drawn from the wall cavity or subfloor.
Yes, we clean detached systems on residential properties throughout Frisco. Outbuilding units are often overlooked in maintenance schedules and can develop significant debris loads from nearby unpaved access roads and open land. We scope these systems with the same video inspection and written pricing standard as the main house. The photo record is included.
Most Frisco residential systems are designed for MERV 8 and should not run above MERV 10 without verified blower motor capacity. Higher MERV ratings filter more particulate but restrict airflow, and in Frisco’s summer heat that restriction forces longer run times and can cause bypass leakage around the filter frame. We check your system’s static pressure tolerance during the cleaning visit and recommend the correct rating in the written job record. Call (940) 240-8552 for an exact quote - estimates are free.
Schedule Your Frisco Air Duct Cleaning
Call (940) 240-8552 to speak with a live person, 24/7. We’ll schedule a video inspection, deliver a written price before any work starts, and leave you with a Documented Photo Record of every duct run we cleaned. The 365-Day Done Right Promise applies to every job. Haven Standard Clause 1: Written Price Before Work Starts. No exceptions.
Written by Tomas Reyes, Owner at CleanRun Duct Repair & Cleaning, serving Frisco since 2013.




Before
After
Before
After